Why did my tankless water heater stop working?
There is not one cause for every unit. Call or text with the brand and the error code showing on your tankless water heater. Diagnosis checks the unit’s operation before a repair is recommended.
Water going cold, a unit that will not start or a recurring error code can have different causes. Tankless water heater diagnostics identify the fault so the repair addresses the problem instead of relying on another reset.
A failed component may be replaceable without replacing the whole heater. Warranty parts replacement starts with identifying the correct part and checking the manufacturer’s coverage for your unit. Labor may be separate from parts coverage.
Mineral buildup can interfere with tankless operation. Flushing and descaling remove buildup from the water-heating passages, while maintenance addresses the unit’s service needs. The work and interval follow the manufacturer’s guidance and the condition of the system.
Hot water works—but takes too long to reach the bathroom or kitchen faucet? Recirculation may shorten that wait without replacing an otherwise working heater. The pump, controls and piping arrangement must be compatible with the existing system.
When repairs are no longer the practical choice, replacement should solve the household’s hot-water needs—not simply swap one box for another. We assess the existing installation and your household’s hot-water use before recommending a replacement.
Ready to replace a tank water heater with a tankless system? Start with the hot water your household uses and the connections the installation needs. Sizing, venting and available space help determine the right setup before the conversion begins.
Need Rinnai tankless water heater repair or Navien tankless water heater maintenance? Get help with troubleshooting, flushing and replacement parts for your unit. Repair and warranty-parts options depend on the model, the fault and the manufacturer’s coverage.
There is not one cause for every unit. Call or text with the brand and the error code showing on your tankless water heater. Diagnosis checks the unit’s operation before a repair is recommended.
They may need flushing or descaling to address mineral buildup. Follow the maintenance guidance for the specific model and water conditions rather than assuming every installation needs the same interval.
A tankless heater does not eliminate the water already sitting in the pipes. Travel distance and system operation affect the wait; compatible recirculation can help shorten it.
There is no stored tank to empty, but heating capacity is limited. Demand beyond the unit’s capacity can affect delivery; sizing considers simultaneous use and incoming water temperature.
Changing water flow, demand or a system fault can interrupt hot-water delivery. Testing helps distinguish a heater problem from a flow or fixture issue instead of assuming the unit needs replacing.
Not necessarily. Eligibility, covered parts and labor terms vary. The applicable coverage and repair price must be checked for the unit.
Code meanings can vary by model. Call or text with the brand and the error code showing on your tankless water heater.
On the models covered by Rinnai’s diagnostic guide, code 11 indicates no ignition. It does not identify one failed part; diagnosis is needed to determine the cause.
On the covered models, code 12 indicates flame failure. Testing identifies the cause before a repair is recommended.
On applicable models, LC indicates scale buildup in the heat exchanger. Service can determine the appropriate flushing or descaling; clearing a display does not remove buildup.
No hot water, an error code or a longer wait than you want? Call, text, or use the contact form to tell us what is happening with your tankless water heater.
Serving Charleston, Summerville and surrounding communities.
